HVAC System

High Vacuum Dust Collector

The Compact High Vacuum Dust Collector series is specifically suited to applications where high suction is required, such as from hand held power tools or centralised vacuum systems.

These units are ideally suited to continuous operation since the filters are continuously cleaned while in operation. The tubular filters permit blockage-free dust release. Polluted air enters through an inlet in the main body and is directed upwards through the array of tubular filters. The larger dust particles drop out into the hopper while the lighter and finer particles continue into the array of filters. The cleaned air then enters the clean-air chamber where an array of blow-tubes are positioned. The tubes blast compressed air into the filters to help release the dust. The cleaned air is then discharged to atmosphere or through discharge ductwork.

Compressed air is ejected through a solenoid valve which travels through the filters. The air causes the dust to fall off the filters and collect in the bin below. Tubular Polyester needle felt 550 g/m2.

Construction is from Bolt-together 1.6 mm and 3 mm thick Galvanised sheetmetal panels.

The unit is supplied with an electric motor starter with start/stop push buttons automatic electronic timer for filter cleaning.



Wet Spray Booths

The Polex range of Dry Spray booths are constructed from bolt-together modular Galvanised sheetmetal panels. Dry paper filter media is fitted into the filter wall. The media is suitable to filter many paint and adhesive products. Spray booths are supplied complete with axial extraction fans with Ex'e' rated motors.






Dry Spray Booths

The Polex range of Dry Spray booths are constructed from bolt-together modular Galvanised sheetmetal panels. Dry paper filter media is fitted into the filter wall. The media is suitable to filter many paint and adhesive products. Spray booths are supplied complete with axial extraction fans with Ex'e' rated motors.

Buy Australian Manufactured Goods

If we as a nation will not support our local manufactures then the Australian manufacturing industry will be doomed. Australia will loose 100m,000's of skilled jobs such as tradesman and engineers. And as Australian Manufactuerers it would be hypocritical for us not to buy Australian. We must support one another to ensure our survival.